Faireog Cábla Miotail (snáithe méadrach/Pg/Npt/G)
Faireog Cábla Miotail (snáithe méadrach/Pg/Npt/G)
Réamhrá
Úsáidtear faireoga cábla go príomha chun na cáblaí a chlampáil, a shocrú, a chosaint ó uisce agus deannaigh.Cuirtear i bhfeidhm go forleathan iad ar réimsí cosúil le boird rialaithe, gairis, soilse, trealamh meicniúil, traein, mótair, tionscadail etc.Is féidir linn faireoga cábla miotail a sholáthar duit déanta as práis nicilphlátáilte (Ordú Uimh .: HSM), cruach dhosmálta (Ordú Uimh .: HSMS) agus alúmanam (Ordú Uimh .: HSMAL).
| Ábhar: | Corp: práis nicilphlátáilte;séala: polaimíd;séalaithe: rubair modhnaithe |
| Raon teochta: | Íosmhéid -40℃,100 uasta℃,Gearrthéarmach 120℃ |
| Céim chosanta: | IP68(IEC60529) le O-fáinne oiriúnach laistigh den raon clampála sonraithe |
| Airíonna: | Friotaíocht ar chreathadh agus ar thionchar, i gcomhréir le IEC-60077-1999. |
| Feidhmchláir: | Tógáil meaisín, trealamh leictreach, cófra rialaithe leictreachais |
| Deimhnithe: | CE, RoHS, UL |
Sonraíocht
(Déan teagmháil linn le do thoil le haghaidh tuilleadh eolais má tá méideanna eile uait nach bhfuil san áireamh sa liosta seo a leanas.)
| Faireog cábla práis nicilphlátáilte (snáithe méadrach) |
|
| |||||
|
|
|
|
|
|
|
|
|
| Airteagal uimh. | Snáithe | Raon clampála | AG | GL | H | Méid eochair | Paicéad |
|
| Toise | mm | mm | mm | mm | mm | aonaid |
| HSM-M8 | M8×1.0 | 3~5 | 8 | 6 | 19 | 14/14 | 50 |
| HSM-M10 | M10×1.0 | 3~6.5 | 10 | 6 | 19 | 14/14 | 50 |
| HSM-M12 | M12×1.5 | 3~6.5 | 12 | 6 | 19 | 14/14 | 75 |
| HSM-M16-H | M16×1.5 | 3~6.5 | 16 | 7 | 20 | 14/18 | 75 |
| HSM-M16 | M16×1.5 | 4~8 | 16 | 7 | 21 | 17/18 | 75 |
| HSM-M16-D | M16×1.5 | 5~10 | 16 | 7 | 22.5 | 20/20 | 50 |
| HSM-M18 | M18×1.5 | 5~10 | 18 | 7 | 22.5 | 20/20 | 50 |
| HSM-M20-H | M20×1.5 | 5~10 | 20 | 7 | 22.5 | 20/22 | 32 |
| HSM-M20 | M20×1.5 | 6~12 | 20 | 7 | 23.5 | 22/22 | 32 |
| HSM-M20-D | M20×1.5 | 8~14 | 20 | 7 | 23 | 24/24 | 32 |
| HSM-M22 | M22×1.5 | 8~14 | 22 | 7 | 23 | 24/24 | 32 |
| HSM-M24-H | M24×1.5 | 6~12 | 24 | 7 | 23.5 | 24/27 | 32 |
| HSM-M24 | M24×1.5 | 8~14 | 24 | 7 | 23 | 24/27 | 18 |
| HSM-M25-H | M25×1.5 | 8~14 | 25 | 7 | 23 | 24/28 | 18 |
| HSM-M25 | M25×1.5 | 10~16 | 25 | 7 | 24.5 | 28/28 | 18 |
| HSM-M25-D | M25×1.5 | 13~18 | 25 | 7 | 26 | 30/30 | 18 |
| HSM-M27-H | M27×2.0 | 10~16 | 27 | 8 | 24.5 | 28/30 | 18 |
| HSM-M27 | M27×2.0 | 13~18 | 27 | 8 | 26 | 30/30 | 18 |
| HSM-M30-H | M30×2.0 | 10~16 | 30 | 8 | 24.5 | 28/34 | 18 |
| HSM- M30 | M30×2.0 | 13~18 | 30 | 8 | 26 | 30/34 | 18 |
| HSM-M32-H | M32×1.5 | 13~18 | 32 | 8 | 26 | 30/36 | 18 |
| HSM- M32 | M32×1.5 | 15~22 | 32 | 8 | 28 | 36/36 | 18 |
| HSM-M32-D | M32×1.5 | 18~25 | 32 | 8 | 33 | 40/38 | 8 |
| HSM- M33 | M33×2.0 | 18-25 | 33 | 8 | 33 | 40/38 | 8 |
| HSM-M36-H | M36×2.0 | 15~22 | 36 | 8 | 28 | 36/40 | 8 |
| HSM- M36 | M36×2.0 | 18~25 | 36 | 8 | 33 | 40/40 | 8 |
| HSM-M40-H | M40×1.5 | 18~25 | 40 | 9 | 33.5 | 40/45 | 8 |
| HSM-M40 | M40×1.5 | 22~30 | 40 | 9 | 35.5 | 45/45 | 8 |
| HSM-M40-D | M40×1.5 | 22~32 | 40 | 9 | 38.5 | 50/50 | 4 |
| HSM- M42 | M42×2.0 | 22~32 | 42 | 9 | 38.5 | 50/50 | 4 |
| HSM-M48 | M48×2.0 | 22~32 | 48 | 9 | 38.5 | 50/52 | 4 |
| HSM-M50 | M50×1.5 | 30~38 | 50 | 9 | 40 | 58/55 | 4 |
| HSM-M56 | M56×2.0 | 30~38 | 56 | 9 | 40 | 58/60 | 4 |
| HSM-M60 | M60×2.0 | 37-44 | 60 | 10 | 41 | 65/65 | 2 |
| HSM-M63 | M63×1.5 | 37~44 | 63 | 10 | 41 | 65/70 | 2 |
| HSM-M63-D | M63×1.5 | 42~53 | 63 | 10 | 44.5 | 75/75 | 2 |
| HSM- M64 | M64×2.0 | 37~44 | 64 | 10 | 41 | 65/70 | 2 |
|
|
|
| |||||
| Faireog cábla práis nicilphlátáilte (Snáithe méadrach - méid Jumbo) |
|
| |||||
|
|
|
|
|
|
|
|
|
| Airteagal uimh. | Snáithe | Raon clampála | AG | GL | SW1/SW2 | H luach | Paicéad |
|
| Toise | mm | mm | mm |
|
| aonaid |
| HSM-M72-H | M72X2.0 | 52-57 | 72 | 12 | 80/80 | 43 | 2 |
| HSM-M75-H | M75X2.0 | 52-57 | 75 | 12 | 80/80 | 43 | 2 |
| HSM-M80-H | M80X2.0 | 52-57 | 80 | 12 | 80/86 | 43 | 2 |
| HSM-M72 | M72X2.0 | 55-61 | 72 | 12 | 86/86 | 43 | 2 |
| HSM-M75 | M75X2.0 | 55-61 | 75 | 12 | 86/86 | 43 | 2 |
| HSM-M80 | M80X2.0 | 55-61 | 80 | 12 | 86/86 | 43 | 2 |
| HSM-M80-D | M80X2.0 | 60-66 | 80 | 12 | 90/90 | 43 | 2 |
| Faireog cábla práis nicilphlátáilte (Snáithe méadrach: snáithe fadaithe) |
|
| |||||
|
|
|
|
|
|
|
|
|
| Airteagal uimh. | Snáithe | Raon clampála | AG | GL | H | Méid eochair | Paicéad |
|
| Toise | mm | mm | mm | mm | mm | aonaid |
| HSM-M12-L | M12×1.5 | 3~6.5 | 12 | 10 | 19 | 14/14 | 50 |
| HSM-M16-HL | M16×1.5 | 3~6.5 | 16 | 10 | 20 | 14/18 | 50 |
| HSM-M16-L | M16×1.5 | 4~8 | 16 | 10 | 21 | 17/18 | 50 |
| HSM-M16-DL | M16×1.5 | 5~10 | 16 | 10 | 22.5 | 20/20 | 50 |
| HSM-M18-L | M18×1.5 | 5~10 | 18 | 10 | 22.5 | 20/20 | 50 |
| HSM-M20-HL | M20×1.5 | 5~10 | 20 | 10 | 22.5 | 20/22 | 32 |
| HSM-M20-L | M20×1.5 | 6~12 | 20 | 10 | 23.5 | 22/22 | 32 |
| HSM-M20-DL | M20×1.5 | 8~14 | 20 | 10 | 23 | 24/24 | 32 |
| HSM-M22-L | M22×1.5 | 8~14 | 22 | 10 | 23 | 24/24 | 32 |
| HSM-M24-HL | M24×1.5 | 6~12 | 24 | 12 | 23.5 | 24/27 | 32 |
| HSM-M24-L | M24×1.5 | 8~14 | 24 | 12 | 23 | 24/27 | 18 |
| HSM-M25-HL | M25×1.5 | 8~14 | 25 | 12 | 23 | 24/28 | 18 |
| HSM-M25-L | M25×1.5 | 10~16 | 25 | 12 | 24.5 | 28/28 | 18 |
| HSM-M25-DL | M25×1.5 | 13~18 | 25 | 12 | 26 | 30/30 | 18 |
| HSM-M27-HL | M27×2.0 | 10~16 | 27 | 12 | 24.5 | 28/30 | 18 |
| HSM-M27-L | M27×2.0 | 13~18 | 27 | 12 | 26 | 30/30 | 18 |
| HSM-M30-HL | M30×2.0 | 10~16 | 30 | 12 | 24.5 | 28/34 | 18 |
| HSM-M30-L | M30×2.0 | 13~18 | 30 | 12 | 26 | 30/34 | 18 |
| HSM-M32-HL | M32×1.5 | 13~18 | 32 | 12 | 26 | 30/36 | 18 |
| HSM-M32-L | M32×1.5 | 15~22 | 32 | 12 | 28 | 36/36 | 18 |
| HSM-M32-DL | M32×1.5 | 18~25 | 32 | 12 | 33 | 40/38 | 8 |
| HSM-M33-L | M33×2.0 | 18-25 | 33 | 12 | 33 | 40/38 | 8 |
| HSM-M36-HL | M36×2.0 | 15~22 | 36 | 12 | 28 | 36/40 | 8 |
| HSM-M36-L | M36×2.0 | 18~25 | 36 | 12 | 33 | 40/40 | 8 |
| HSM-M40-HL | M40×1.5 | 18~25 | 40 | 15 | 33 | 40/45 | 4 |
| HSM-M40-L | M40×1.5 | 22~30 | 40 | 15 | 35.5 | 45/45 | 4 |
| HSM-M40-DL | M40×1.5 | 22~32 | 40 | 15 | 38.5 | 50/50 | 4 |
| HSM-M42-L | M42×2.0 | 22~32 | 42 | 15 | 38.5 | 50/50 | 4 |
| HSM-M48-L | M48×2.0 | 22~32 | 48 | 15 | 38.5 | 50/52 | 4 |
| HSM-M50-L | M50×1.5 | 30~38 | 50 | 15 | 40 | 58/55 | 2 |
| HSM-M56-L | M56×2.0 | 30~38 | 56 | 15 | 40 | 58/60 | 4 |
| HSM-M60-L | M60×2.0 | 37~44 | 60 | 15 | 41 | 65/65 | 2 |
| HSM-M63-L | M63×1.5 | 37~44 | 63 | 15 | 41 | 65/70 | 2 |
| HSM-M63-DL | M63×1.5 | 42~53 | 63 | 15 | 44.5 | 75/75 | 1 |
| HSM-M64-L | M64×2.0 | 37~44 | 64 | 15 | 41 | 65/70 | 2 |
| Faireog cábla práis nicilphlátáilte (snáithe PG) |
|
| |||||
|
|
|
|
|
|
|
|
|
| Airteagal uimh. | Snáithe | Raon clampála | AG | GL | H | Méid eochair | Paicéad |
|
| Toise | mm | mm | mm | mm | mm | aonaid |
| HSM-P07 | PG7 | 3~6.5 | 12.5 | 6 | 19 | 14/14 | 75 |
| HSM-P09-H | PG9 | 3~6.5 | 15.2 | 7 | 20 | 14/17 | 75 |
| HSM-P09 | PG9 | 4~8 | 15.2 | 7 | 21 | 17/17 | 75 |
| HSM-P11 | PG11 | 5~10 | 18.6 | 7 | 22.5 | 20/20 | 32 |
| HSM-P13.5-H | PG13.5 | 5~10 | 20.4 | 7 | 22.5 | 20/22 | 32 |
| HSM-P13.5 | PG13.5 | 6~12 | 20.4 | 7 | 23.5 | 22/22 | 32 |
| HSM-P16-H | PG16 | 6~12 | 22.5 | 7 | 23.5 | 22/24 | 32 |
| HSM-P16 | PG16 | 8~14 | 22.5 | 7 | 23 | 24/24 | 32 |
| HSM-P21-H | PG21 | 10~16 | 28.3 | 7 | 24.5 | 28/30 | 18 |
| HSM-P21 | PG21 | 13~18 | 28.3 | 7 | 26 | 30/30 | 18 |
| HSM-P29-H | PG29 | 15~22 | 37 | 8 | 28 | 36/40 | 8 |
| HSM-P29 | PG29 | 18~25 | 37 | 8 | 33 | 40/40 | 8 |
| HSM-P36 | PG36 | 22~32 | 47 | 9 | 38.5 | 50/50 | 4 |
| HSM-P42 | PG42 | 30~38 | 54 | 9 | 40 | 58/58 | 2 |
| HSM-P48 | PG48 | 37~44 | 59.3 | 10 | 41 | 65/65 | 2 |
| Faireog cábla práis nicilphlátáilte (snáithe PG: snáithe fadaithe) |
|
| |||||
|
|
|
|
|
|
|
|
|
| Airteagal uimh. | Snáithe | Raon clampála | AG | GL | H | Méid eochair | Paicéad |
|
| Toise | mm | mm | mm | mm | mm | aonaid |
| HSM-P07-L | PG7 | 3~6.5 | 12.5 | 10 | 19 | 14/14 | 50 |
| HSM-P09-HL | PG9 | 3~6.5 | 15.2 | 10 | 20 | 14/17 | 50 |
| HSM-P09-L | PG9 | 4~8 | 15.2 | 10 | 21 | 17/17 | 50 |
| HSM-P11-L | PG11 | 5~10 | 18.6 | 10 | 22.5 | 20/20 | 50 |
| HSM-P13.5-HL | PG13.5 | 5~10 | 20.4 | 10 | 22.5 | 20/22 | 32 |
| HSM-P13.5-L | PG13.5 | 6~12 | 20.4 | 10 | 23.5 | 22/22 | 32 |
| HSM-P16-HL | PG16 | 6~12 | 22.5 | 10 | 23.5 | 22/24 | 32 |
| HSM-P16-L | PG16 | 8~14 | 22.5 | 10 | 23 | 24/24 | 32 |
| HSM-P21-HL | PG21 | 10~16 | 28.3 | 12 | 24.5 | 28/30 | 18 |
| HSM-P21-L | PG21 | 13~18 | 28.3 | 12 | 26 | 30/30 | 18 |
| HSM-P29-HL | PG29 | 15~22 | 37 | 12 | 28 | 36/40 | 8 |
| HSM-P29-L | PG29 | 18~25 | 37 | 12 | 33 | 40/40 | 8 |
| HSM-P36-L | PG36 | 22~32 | 47 | 15 | 38.5 | 50/50 | 4 |
| HSM-P42-L | PG42 | 30~38 | 54 | 15 | 40 | 58/58 | 2 |
| HSM-P48-L | PG48 | 37~44 | 59.3 | 15 | 41 | 65/65 | 2 |
| Faireog cábla práis nicilphlátáilte (snáithe G) |
|
| |||||
|
|
|
|
|
|
|
|
|
| Airteagal uimh. | Snáithe | Raon clampála | AG | GL | H | Méid eochair | Paicéad |
|
| Toise | mm | mm | mm | mm | mm | aonaid |
| HSM-G3/8 | G3/8″ | 4~8 | 16.66 | 8 | 21 | 17/20 | 32 |
| HSM-G1/2-H | G1/2" | 5~10 | 20.99 | 8 | 22.5 | 20/24 | 32 |
| HSM-G1/2 | G1/2" | 6~12 | 20.99 | 8 | 23.5 | 22/24 | 32 |
| HSM-G1/2-D | G1/2" | 8~14 | 20.99 | 8 | 23.5 | 24/24 | 32 |
| HSM-G3/4-TH | G3/4″ | 6~12 | 26.44 | 8 | 23.5 | 22/30 | 18 |
| HSM-G3/4-H | G3/4″ | 8~14 | 26.44 | 8 | 23 | 24/30 | 18 |
| HSM-G3/4 | G3/4″ | 13~18 | 26.44 | 8 | 26 | 30/30 | 18 |
| HSM-G1 | G1" | 18~25 | 33.24 | 9 | 33 | 40/40 | 8 |
| HSM-G1 1/4 | G1 1/4" | 22~32 | 41.91 | 10 | 38.5 | 50/50 | 4 |
| HSM-G1 1/2 | G1 1/2" | 30~38 | 47.8 | 10 | 40 | 58/55 | 2 |
| HSM-G2 | G2″ | 37~44 | 59.61 | 11 | 41 | 65/65 | 2 |
| Faireog cábla práis nicilphlátáilte (snáithe NPT) |
|
| |||||
|
|
|
|
|
|
|
|
|
| Airteagal uimh. | Snáithe | Raon clampála | AG | GL | H | Méid eochair | Paicéad |
|
| Toise | mm | mm | mm | mm | mm | aonaid |
| HSM-N3/8 | NPT3/8″ | 4~8 | 17.05 | 11 | 21 | 17/20 | 50 |
| HSM-N1/2-H | NPT1/2″ | 5~10 | 20.85 | 13 | 23.5 | 20/23 | 32 |
| HSM-N1/2 | NPT1/2″ | 6~12 | 20.85 | 13 | 23.5 | 22/23 | 32 |
| HSM-N1/2-D | NPT1/2″ | 8~14 | 20.85 | 13 | 23.5 | 24/24 | 32 |
| HSM-N3/4-TH | NPT3/4″ | 6~12 | 26.3 | 13 | 23.5 | 22/30 | 18 |
| HSM-N3/4-H | NPT3/4″ | 8~14 | 26.3 | 13 | 23 | 24/30 | 18 |
| HSM-N3/4 | NPT3/4″ | 13~18 | 26.3 | 13 | 26 | 30/30 | 18 |
| HSM-N1 | NPT1″ | 18~25 | 33.15 | 16 | 33 | 40/40 | 8 |
| HSM-N1 1/4 | NPT1 1/4″ | 22~32 | 41.85 | 16 | 38.5 | 50/50 | 4 |
| HSM-N1 1/2 | NPT1 1/2″ | 30~38 | 47.75 | 18 | 40 | 58/55 | 2 |
| HSM-N2 | NPT2″ | 37~44 | 59.55 | 18 | 41 | 65/65 | 1 |
