Cuibheoir Miotail (Méadrach go PG, PG go M)
Cuibheoir Miotail (Méadrach go PG, PG go M)
Réamhrá
Is féidir linn cuibheoirí miotail a sholáthar duit déanta as práis nicilphlátáilte (Ordú Uimh .: ADM), cruach dhosmálta (Ordú Uimh .: ADMS) agus alúmanam (Ordú Uimh.: ADMAL).
| Ábhar: | Prás nicilphlátáilte |
| Raon teochta: | Íosmhéid -40℃,100 uasta℃ |
| Céim chosanta: | IP68(IEC60529) le O-fáinne oiriúnach |
| Deimhnithe: | CE, RoHS |
Sonraíocht
(Déan teagmháil linn le do thoil le haghaidh tuilleadh faisnéise má tá méideanna eile uait nach bhfuil san áireamh sa liosta seo a leanas, lena n-áirítear tiontú snáithe NPT agus G.)
| Cuibheoir nicilphlátáilte (ADM-M/P) | |||||||
| Airteagal uimh. | Snáithe fireann | Snáithe baineann | Fad snáithe | Fad | SW | Foirm | Paicéad |
| Toise | mm | mm | mm | mm | aonaid | ||
| ADM-M16/P07 | M16×1.5 | PG7 | 7 | 10 | 18 | A | 50 |
| ADM-M16/P09 | M16×1.5 | PG9 | 7 | 20.5 | 18 | B | 75 |
| ADM-M16/P11 | M16×1.5 | PG11 | 7 | 20.5 | 22 | B | 32 |
| ADM-M18/P09 | M18×1.5 | PG9 | 7 | 20.5 | 20 | B | 32 |
| ADM-M18/P11 | M18×1.5 | PG11 | 7 | 20.5 | 22 | B | 32 |
| ADM-M18/P13.5 | M18×1.5 | PG13.5 | 7 | 20.5 | 24 | B | 32 |
| ADM-M20/P11 | M20×1.5 | PG11 | 7 | 20.5 | 22 | B | 32 |
| ADM-M20/P13.5 | M20×1.5 | PG13.5 | 7 | 20.5 | 24 | B | 32 |
| ADM-M20/P16 | M20×1.5 | PG16 | 7 | 20.5 | 26 | B | 36 |
| ADM-M25/P16 | M25×1.5 | PG16 | 7 | 21 | 28 | B | 36 |
| ADM-M25/P21 | M25×1.5 | PG21 | 7 | 23 | 32 | B | 18 |
| ADM-M27/P13.5 | M27×2.0 | PG13.5 | 8 | 12 | 30 | A | 18 |
| * ADM-M27/P16 | M27×2.0 | PG16 | 8 | 12 | 30 | A | 18 |
| ADM-M32/P16 | M32×1.5 | PG16 | 8 | 12 | 36 | A | 18 |
| ADM-M32/P21 | M32×1.5 | PG21 | 8 | 12 | 36 | A | 18 |
| ADM-M32/P29 | M32×1.5 | PG29 | 8 | 24 | 40 | B | 8 |
| ADM-M40/P29 | M40×1.5 | PG29 | 9 | 25 | 45 | B | 8 |
| ADM-M40/P36 | M40×1.5 | PG36 | 9 | 28 | 50 | B | 8 |
| ADM-M50/P21 | M50×1.5 | PG21 | 9 | 14 | 55 | A | 8 |
| ADM-M50/P29 | M50 ×1.5 | PG29 | 9 | 14 | 55 | A | 8 |
| Cuibheoir nicilphlátáilte (ADM-P/M) | |||||||
| Airteagal uimh. | Snáithe fireann | Snáithe baineann | Fad snáithe | Fad iomlán | SW | Foirm | Paicéad |
| Toise | mm | mm | mm | mm | aonaid | ||
| ADM-P09/M16 | PG9 | M16×1.5 | 7 | 20.5 | 19 | B | 75 |
| ADM-P09/M20 | PG9 | M20×1.5 | 7 | 20.5 | 23 | B | 32 |
| ADM-P11/M20 | PG11 | M20×1.5 | 7 | 20.5 | 23 | B | 32 |
| ADM-P13.5/M20 | PG13.5 | M20×1.5 | 7 | 20.5 | 23 | B | 32 |
| ADM-P16/M20 | PG16 | M20×1.5 | 7 | 20.5 | 26 | B | 18 |
| ADM-P16/M25 | PG16 | M25×1.5 | 7 | 22.5 | 28 | B | 18 |
| ADM-P21/M25 | PG21 | M25×1.5 | 7 | 23 | 32 | B | 18 |
| ADM-P21/M32 | PG21 | M32×1.5 | 7 | 23 | 36 | B | 18 |
| ADM-P21/M40 | PG21 | M40×1.5 | 7 | 26 | 45 | B | 8 |
| ADM-P29/M40 | PG29 | M40×1.5 | 8 | 27 | 45 | B | 8 |
| ADM-P36/M50 | PG36 | M50×1.5 | 9 | 28 | 55 | B | 8 |
| ADM-P42/M63 | PG42 | M63×1.5 | 9 | 28.5 | 70 | B | 3 |
