Faireog Cábla Miotail EX
Réamhrá EXGland Cábla Miotail
Úsáidtear faireoga cábla go príomha chun na cáblaí a chlampáil, a shocrú, a chosaint ó uisce agus deannaigh.Cuirtear i bhfeidhm go forleathan iad ar réimsí cosúil le boird rialaithe, gairis, soilse, trealamh meicniúil, traein, mótair, tionscadail etc.
Is féidir linn freisin faire cábla cruach dhosmálta EX a sholáthar.Den sórt sin mar SUS304, SUS316L.
| Ábhar: | Corp: práis nicilphlátáilte Séala: Polaimíd, Séalaithe: rubar modhnaithe |
| Raon teochta: | Íosmhéid -40℃, uasmhéid 100℃,Gearrthéarma 120℃ |
| Céim chosanta: | laistigh den raon clampála, is féidir a chéim cosanta a bhaint amach IP68 |
| Airíonna: | éirigh leis an turgnamh ar fhriotaíocht IEC-60077-1999 le creathadh agus tionchar, a rith RoHS |
| Céim EX:
Deimhnithe: | EX eb IIC Gb Ex tb IIIC Db Teastas UIMH.: TUV 17ATEX 8015X IECEx TUR 17.0009X CE, RoHS, ATEX, IECEx
|
Sonraíocht:
(Déan teagmháil linn le do thoil le haghaidh tuilleadh eolais má tá méideanna eile uait nach bhfuil san áireamh sa liosta seo a leanas.)
| Airteagal uimh. | Snáithe | Raon clampála | AG | GL | (H) | SW1/SW2 | Paicéad |
| Toise | mm | mm | mm | mm | mm | aonaid | |
| HSM-EX-M12 | M12×1.5 | 3~6.5 | 12 | 6 | 19 | 14/14 | 75 |
| HSM-EX-M16-H | M16×1.5 | 3~6.5 | 16 | 7 | 20 | 14/18 | 75 |
| HSM-EX-M16 | M16×1.5 | 4~8 | 16 | 7 | 21 | 17/18 | 75 |
| HSM-EX-M16-D | M16×1.5 | 5~10 | 16 | 7 | 22.5 | 20/20 | 50 |
| HSM-EX-M18 | M18×1.5 | 5~10 | 18 | 7 | 22.5 | 20/20 | 50 |
| HSM-EX-M20-H | M20×1.5 | 5~10 | 20 | 7 | 22.5 | 20/22 | 32 |
| HSM-EX-M20 | M20×1.5 | 6~12 | 20 | 7 | 23.5 | 22/22 | 32 |
| HSM-EX-M20-D | M20×1.5 | 8~14 | 20 | 7 | 23 | 24/24 | 32 |
| HSM-EX-M22 | M22×1.5 | 8~14 | 22 | 7 | 23 | 24/24 | 32 |
| HSM-EX-M24-H | M24×1.5 | 6~12 | 24 | 7 | 23.5 | 22/28 | 18 |
| HSM-EX-M24 | M24×1.5 | 8~14 | 24 | 7 | 23 | 24/27 | 18 |
| HSM-EX-M25-H | M25×1.5 | 8~14 | 25 | 7 | 23 | 24/28 | 18 |
| HSM-EX-M25 | M25×1.5 | 10~16 | 25 | 7 | 24.5 | 28/28 | 18 |
| HSM-EX-M25-D | M25×1.5 | 13~18 | 25 | 7 | 26 | 30/30 | 18 |
| HSM-EX-M27-H | M27×2.0 | 10~16 | 27 | 8 | 24.5 | 28/30 | 18 |
| HSM-EX-M27 | M27×2.0 | 13~18 | 27 | 8 | 26 | 30/30 | 18 |
| HSM-EX-M30-H | M30×2.0 | 10~16 | 30 | 8 | 24.5 | 28/34 | 18 |
| HSM-EX-M30 | M30×2.0 | 13~18 | 30 | 8 | 26 | 30/34 | 18 |
| HSM-EX-M32-H | M32×1.5 | 13~18 | 32 | 8 | 26 | 30/36 | 18 |
| HSM-EX-M32 | M32×1.5 | 15~22 | 32 | 8 | 28 | 36/36 | 18 |
| HSM-EX-M32-D | M32×1.5 | 18~25 | 32 | 8 | 33 | 40/38 | 8 |
| HSM-EX-M33 | M33×2.0 | 18~25 | 33 | 8 | 33 | 40/38 | 8 |
| HSM-EX-M36-H | M36×2.0 | 15~22 | 36 | 8 | 28 | 36/40 | 8 |
| HSM-EX-M36 | M36×2.0 | 18~25 | 36 | 8 | 33 | 40/40 | 8 |
| HSM-EX-M40-H | M40×1.5 | 18~25 | 40 | 9 | 33.5 | 40/45 | 8 |
| HSM-EX-M40 | M40×1.5 | 22~30 | 40 | 9 | 35.5 | 45/45 | 8 |
| HSM-EX-M40-D | M40×1.5 | 22~32 | 40 | 9 | 38.5 | 50/50 | 4 |
| HSM-EX-M42 | M42×2.0 | 22~32 | 42 | 9 | 38.5 | 50/50 | 4 |
| HSM-EX-M48 | M48×2.0 | 22~32 | 48 | 9 | 38.5 | 50/52 | 4 |
| HSM-EX-M50 | M50×1.5 | 30~38 | 50 | 9 | 40 | 58/55 | 4 |
| HSM-EX-M56 | M56×2.0 | 30~38 | 56 | 9 | 40 | 58/60 | 2 |
| HSM-EX-M60 | M60×2.0 | 37~44 | 60 | 10 | 41 | 65/65 | 2 |
| HSM-EX-M63 | M63×1.5 | 37~44 | 63 | 10 | 41 | 65/70 | 2 |
| HSM-EX-M63-D | M63×1.5 | 42~53 | 63 | 10 | 44.5 | 75/75 | 2 |
| HSM-EX-M64 | M64×2.0 | 37~44 | 64 | 10 | 41 | 65/70 | 2 |
