Faireog Cábla Miotail ardteochta le Croí Aonair (snáithe méadrach)
Faireog Cábla Miotail ardteochta le Croí Aonair (snáithe méadrach)
Réamhrá
Úsáidtear faireoga cábla go príomha chun na cáblaí a chlampáil, a shocrú, a chosaint ó uisce agus deannaigh. Cuirtear i bhfeidhm go forleathan iad ar réimsí cosúil le boird rialaithe, gairis, soilse, trealamh meicniúil, traein, mótair, tionscadail etc.Is féidir linn miotail ardteochta a sholáthar duitfaireoga cábla le croí amháin déanta as práis nicilphlátáilte (Ordú Uimh .: HSM.DS), cruach dhosmálta (Ordú Uimh .: HSMS.DS) agus alúmanam (Ordú Uimh .: HSMAL.DS).
| Ábhar: | Corp: práis nicilphlátáilte; séalaithe: rubar sileacain |
| Raon Teochta: | Íosmhéid -50℃,Uasmhéid 200℃ |
| Céim chosanta: | IP68(IEC60529) le O-fáinne oiriúnach laistigh den raon clampála sonraithe |
| Airíonna: | |
| Deimhnithe: | CE, RoHS |
Sonraíocht
(Déan teagmháil linn le do thoil le haghaidh tuilleadh eolais má tá méideanna nó snáitheanna eile uait nach bhfuil san áireamh sa liosta seo a leanas.)
| Airteagal uimh. | Snáithe | Raon clampála | GL | (H) | Méid eochair | Paicéad |
|
| Toise | mm | mm | mm | mm | aonaid |
| HSM.DS-M16/7 | M16 x 1.5 | 4~7 | 7 | 20.5 | 18 | 75 |
| HSM.DS-M20/10 | M20 x 1.5 | 7~10 | 7 | 22 | 22 | 32 |
| HSM.DS-M20/13 | M20 x 1.5 | 9~13 | 7 | 22.5 | 26/24 | 18 |
| HSM.DS-M25/13 | M25 x 1.5 | 9~13 | 7 | 23 | 28 | 18 |
| HSM.DS-M25/15 | M25 x 1.5 | 12~15 | 8 | 24 | 30/28 | 18 |
| HSM.DS-M32/15 | M32 x 1.5 | 12~15 | 8 | 24 | 30/36 | 18 |
| HSM.DS-M32/18 | M32 x 1.5 | 14~18 | 8 | 25 | 36 | 18 |
| HSM.DS-M32/22 | M32 x 1.5 | 18~22 | 8 | 27 | 40/38 | 8 |
| HSM.DS-M40/22 | M40 x 1.5 | 18~22 | 9 | 26 | 40/45 | 8 |
| *HSM.DS-M40/25 | M40 x 1.5 | 21~25 | 9 | 27 | 45 | 8 |
| *HSM.DS-M40/30 | M40 x 1.5 | 25~30 | 9 | 28 | 50/46 | 8 |
| *HSM.DS-M50/30 | M50 x 1.5 | 25~30 | 9 | 28 | 50/55 | 8 |
| *HSM.DS-M50/34 | M50 x 1.5 | 29~34 | 9 | 29 | 55 | 8 |
| *HSM.DS-M50/37 | M50 x 1.5 | 32~37 | 9 | 29 | 55 | 8 |
| *HSM.DS-M56/37 | M56 x 1.5 | 32~37 | 9 | 29 | 55/60 | 2 |
| HSM.DS-M56/40 | M56 x 1.5 | 35~40 | 9 | 32 | 60 | 2 |
| *HSM.DS-M56/43 | M56 x 1.5 | 38~43 | 10 | 32 | 65 | 2 |
| *HSM.DS-M63/43 | M63 x 1.5 | 38~43 | 10 | 31.5 | 65/70 | 2 |
| *HSM.DS-M63/46 | M63 x 1.5 | 41~46 | 10 | 31.5 | 70 | 2 |
| *HSM.DS-M63/51 | M63 x 1.5 | 45~51 | 10 | 35 | 75 | 2 |
