Faireog Cábla Miotail le Croí Aonair (snáithe méadrach/Pg)
Faireog Cábla Miotail le Croí Aonair (snáithe méadrach/Pg)
Réamhrá
Úsáidtear faireoga cábla go príomha chun na cáblaí a chlampáil, a shocrú, a chosaint ó uisce agus deannaigh.Cuirtear i bhfeidhm go forleathan iad ar réimsí cosúil le boird rialaithe, gairis, soilse, trealamh meicniúil, traein, mótair, tionscadail etc.Is féidir linn miotail a sholáthar duitfaireoga cábla le croí amháin déanta as práis nicilphlátáilte (Ordú Uimh .: HSM.D), cruach dhosmálta (Ordú Uimh .: HSMS.D) agus alúmanam (Ordú Uimh .: HSMAL.D).
| Ábhar: | Corp: práis nicilphlátáilte;séala: FR-TPE;séalaithe: rubair modhnaithe |
| Raon teochta: | Íosmhéid -40℃,100 uasta℃ |
| Céim chosanta: | IP68(IEC60529) le O-fáinne oiriúnach laistigh den raon clampála sonraithe |
| Airíonna: | |
| Feidhmchláir: | |
| Deimhnithe: | CE, RoHS |
Sonraíocht
(Déan teagmháil linn le do thoil le haghaidh tuilleadh eolais má tá méideanna nó snáitheanna eile uait nach bhfuil san áireamh sa liosta seo a leanas.)
| Airteagal uimh. | Snáithe | Raon clampála | AG | GL | (H) | Méid eochair | Paicéad |
|
| Toise | mm | mm | mm | mm | mm | aonaid |
| HSM.D-M12/7 | M12×1.5 | 4~7 | 12 | 6 | 19.5 | 14 | 75 |
| HSM.D-M16/7 | M16×1.5 | 4~7 | 16 | 7 | 19.5 | 18/14 | 75 |
| HSM.D-M16/9.5 | M16×1.5 | 6.5~9.5 | 16 | 7 | 20.5 | 18 | 75 |
| HSM.D-M18/7 | M18×1.5 | 4~7 | 18 | 7 | 19.5 | 20/14 | 75 |
| HSM.D-M18/9.5 | M18×1.5 | 6.5~9.5 | 18 | 7 | 20.5 | 20/18 | 75 |
| HSM.D-M20/7 | M20×1.5 | 4~7 | 20 | 7 | 20 | 22/14 | 32 |
| HSM.D-M20/9.5 | M20×1.5 | 6.5~9.5 | 20 | 7 | 21 | 22/18 | 32 |
| HSM.D-M20/13 | M20×1.5 | 9~13 | 25 | 7 | 23 | 28/26 | 18 |
| HSM.D-M25/9.5 | M25×1.5 | 6.5~9.5 | 25 | 7 | 21 | 28/18 | 18 |
| HSM.D-M25/13 | M25×1.5 | 9~13 | 25 | 7 | 24 | 28 | 18 |
| HSM.D-M25/17 | M25×1.5 | 13~17 | 32 | 7 | 23.5 | 28 | 18 |
| HSM.D-M32/13 | M32×1.5 | 9~13 | 32 | 8 | 24.5 | 36/28 | 8 |
| HSM.D-M32/17 | M32×1.5 | 13~17 | 32 | 8 | 24 | 36/28 | 8 |
| HSM.D-M32/19 | M32×1.5 | 15~19 | 32 | 8 | 25.5 | 36 | 18 |
| HSM.D-M32/22 | M32×1.5 | 18~22 | 32 | 8 | 25 | 36 | 8 |
| HSM.D-M40/19 | M40×1.5 | 15~19 | 40 | 9 | 25 | 45/36 | 8 |
| HSM.D-M40/22 | M40×1.5 | 18~22 | 40 | 9 | 25.5 | 45/36 | 8 |
| HSM.D-M40/25 | M40×1.5 | 21~25 | 40 | 9 | 28 | 45 | 8 |
| HSM.D-M40/28 | M40×1.5 | 24~28 | 40 | 9 | 27.5 | 45 | 8 |
| *HSM.D-M50/25 | M50×1.5 | 21~25 | 50 | 9 | 28 | 55/45 | 8 |
| *HSM.D-M50/28 | M50×1.5 | 24~28 | 50 | 9 | 27.5 | 55/45 | 8 |
| HSM.D-M50/33 | M50×1.5 | 28~33 | 50 | 9 | 27.5 | 55 | 8 |
| HSM.D-M50/37 | M50×1.5 | 32~37 | 50 | 9 | 29.5 | 55 | 8 |
| *HSM.D-M50/40 | M50×1.5 | 35~40 | 50 | 9 | 32 | 55 | 8 |
| *HSM.D-M63/40 | M63×1.5 | 35~40 | 63 | 10 | 32 | 70/55 | 2 |
| *HSM.D-M63/46 | M63×1.5 | 40~46 | 63 | 10 | 35 | 70 | 2 |
| *HSM.D-M63/51 | M63×1.5 | 45~51 | 63 | 10 | 35 | 70 | 2 |
