Faireog Cábla Miotail ardteochta le Ilchroí (snáithe méadrach/PG)
Faireog Cábla Miotail ardteochta le Ilchroí (snáithe méadrach/PG)
Réamhrá
Úsáidtear faireoga cábla go príomha chun na cáblaí a chlampáil, a shocrú, a chosaint ó uisce agus deannaigh. Cuirtear i bhfeidhm go forleathan iad ar réimsí cosúil le boird rialaithe, gairis, soilse, trealamh meicniúil, traein, mótair, tionscadail etc.Is féidir linn faireoga cábla miotail ardteochta a sholáthar duit le croíleacáin il déanta as prás nicilphlátáilte (Ordú Uimh.: HSM.DS-M/nxd), cruach dhosmálta (Ordú Uimh.: HSMS.DS-M/nxd) agus alúmanam (Ordú Uimh.: HSMAL.DS-M/nxd).
| Ábhar: | Corp: práis nicilphlátáilte; séalaithe: rubar sileacain |
| Raon Teochta: | Íosmhéid -50℃,Uasmhéid 200℃ |
| Céim chosanta: | IP68(IEC60529) le O-fáinne oiriúnach laistigh den raon clampála sonraithe |
| Airíonna: | V0(UL94), saor ó halaigine, fosfar agus caidmiam, |
| Deimhnithe: | CE, RoHS, UV-friotaíocht, aosaithe-friotaíocht. |
Sonraíocht
(Déan teagmháil linn le do thoil le haghaidh tuilleadh eolais má tá méideanna nó snáitheanna eile uait nach bhfuil san áireamh sa liosta seo a leanas.)
| Airteagal uimh. | Snáithe | Raon clampála | GL | Méid eochair | Paicéad |
|
| Toise | mm | mm | mm | aonaid |
| * HSM.DS-M20/5×2.5 | M20×1.5 | 5×2.5 | 7 | 22 | 32 |
| HSM.DS- M25/3×5 | M25×1.5 | 3×5 | 7 | 28 | 18 |
| * HSM.DS-M25/3×6.5 | M25×1.5 | 3×6.5 | 7 | 30/28 | 18 |
| HSM.DS-M25/4×3.5 | M25×1.5 | 4×3.5 | 7 | 28 | 18 |
| * HSM.DS-M25/4×5 | M25×1.5 | 4×5 | 7 | 28 | 18 |
| HSM.DS-M25/2×8.5 | M25×1.5 | 2×8.5 | 7 | 30 | 18 |
| * HSM.DS-M25/3×7.5 | M25×1.5 | 3×7.5 | 7 | 30 | 8 |
| HSM.DS- M32/3×8.5 | M32×1.5 | 3×8.5 | 8 | 36 | 8 |
| * HSM.DS-M32/5×5.5 | M32×1.5 | 5×5.5 | 8 | 36 | 8 |
| * HSM.DS-M40/5×8.5 | M40×1.5 | 5×8.5 | 9 | 45 | 8 |
| * HSM.DS-M40/3×12.5 | M40×1.5 | 3×12.5 | 9 | 45 | 8 |
| HSM.DS-M50/4×12.5 | M50×1.5 | 4×12.5 | 9 | 50/55 | 8 |
| HSM.DS-M50/5×12.5 | M50×1.5 | 5×12.5 | 9 | 60 | 2 |
| HSM.DS-M50/13×7 | M50×1.5 | 13×7 | 9 | 55 | 2 |
| * HSM.DS-P21/3×6.5 | PG21 | 3×6.5 | 7 | 30 | 18 |
| *HSM.DS-P21/6×6 | PG21 | 6×6 | 7 | 30 | 18 |
| HSM.DS-P29/3×8.5 | PG29 | 3×8.5 | 8 | 40/36 | 8 |
| * HSM.DS-P36/5×8.5 | PG30 | 5×8.5 | 8 | 50/45 | 4 |
| * HSM.DS-P36/3×12.5 | PG31 | 3×12.5 | 8 | 50/45 | 4 |
