Faireog Chábla EMC (snáithe méadrach/Pg)
Faireog Chábla EMC (snáithe méadrach/Pg)
Réamhrá
Úsáidtear faireoga cábla go príomha chun na cáblaí a chlampáil, a shocrú, a chosaint ó uisce agus deannaigh. Cuirtear i bhfeidhm go forleathan iad ar réimsí cosúil le boird rialaithe, gairis, soilse, trealamh meicniúil, traein, mótair, tionscadail etc.Is féidir linn faireoga cábla EMC a sholáthar duit déanta as práis nicilphlátáilte (Ordú Uimh .: HSM-EMV), cruach dhosmálta (Ordú Uimh .: HSMS-EMV) agus alúmanam (Ordú Uimh .: HSMAL-EMV).
| Ábhar: | Corp: práis nicilphlátáilte; séala: polaimíd; séalaithe: rubair modhnaithe |
| Raon Teochta: | Íosmhéid -40℃,100 uasta℃,Gearrthéarmach 120℃ |
| Céim chosanta: | IP68(IEC60529) le O-fáinne oiriúnach laistigh den raon clampála sonraithe |
| Airíonna: | Friotaíocht ar chreathadh agus ar thionchar, i gcomhréir le IEC-60077-1999. |
| Feidhmchláir: | Tógáil meaisín, trealamh leictreach, cófra rialaithe leictreachais |
| Deimhnithe: | CE, RoHS |
Sonraíocht
(Déan teagmháil linn le do thoil le haghaidh tuilleadh eolais má tá méideanna nó snáitheanna eile uait nach bhfuil san áireamh sa liosta seo a leanas.)
| Airteagal uimh. | Snáithe | Raon clampála | AG | GL | (H) | Méid eochair | Paicéad |
|
| Toise | mm | mm | mm | mm | mm | aonaid |
| HSM-EMV-M12 | M12×1.5 | 3~6.5 | 12 | 6 | 19 | 14/14 | 75 |
| HSM-EMV-M16 | M16×1.5 | 4~8 | 16 | 7 | 21 | 17/18 | 75 |
| HSM-EMV-M18 | M18×1.5 | 5~10 | 18 | 7 | 22.5 | 20/20 | 50 |
| HSM-EMV-M20 | M20×1.5 | 6~12 | 20 | 7 | 25 | 22/22 | 32 |
| HSM-EMV-M24 | M24×1.5 | 8~14 | 24 | 7 | 24 | 24/27 | 18 |
| HSM-EMV-M25 | M25×1.5 | 10~16 | 25 | 7 | 25.5 | 28/28 | 18 |
| HSM-EMV-M25-D | M25×1.5 | 13~18 | 25 | 7 | 27 | 30/30 | 18 |
| HSM-EMV-M30 | M30×2.0 | 13~18 | 30 | 8 | 26 | 30/34 | 18 |
| HSM-EMV- M32 | M32×1.5 | 15~22 | 32 | 8 | 29 | 36/36 | 18 |
| HSM-EMV-M32-D | M32×1.5 | 18~25 | 32 | 8 | 34.5 | 40/38 | 8 |
| HSM-EMV- M36 | M36×2.0 | 18~25 | 36 | 8 | 34.5 | 40/40 | 8 |
| HSM-EMV-M40 | M40×1.5 | 22~30 | 40 | 9 | 37.5 | 45/45 | 4 |
| HSM-EMV-M40-D | M40×1.5 | 22~32 | 40 | 9 | 40 | 50/50 | 4 |
| HSM-EMV-M48 | M48×2.0 | 22~32 | 48 | 9 | 40 | 50/52 | 4 |
| HSM-EMV-M50 | M50×1.5 | 30~38 | 50 | 9 | 42 | 58/55 | 2 |
| HSM-EMV-M56 | M56×2.0 | 30~38 | 56 | 9 | 41 | 60/58 | 2 |
| HSM-EMV-M63 | M63×1.5 | 37~44 | 63 | 10 | 42.5 | 65/70 | 2 |
| HSM-EMV-M64 | M64×2.0 | 37~44 | 64 | 10 | 42.5 | 65/70 | 2 |
|
|
|
|
|
|
|
|
|
| HSM-EMV-P07 | PG7 | 3~6.5 | 12.5 | 6 | 20 | 14/14 | 75 |
| HSM-EMV-P09 | PG9 | 4~8 | 15.2 | 7 | 21 | 17/17 | 75 |
| HSM-EMV-P11 | PG11 | 5~10 | 18.6 | 7 | 23.5 | 20/20 | 32 |
| HSM-EMV-P13.5 | PG13.5 | 6~12 | 20.4 | 7 | 25 | 22/22 | 32 |
| HSM-EMV-P16 | PG16 | 8~14 | 22.5 | 7 | 24 | 24/24 | 32 |
| HSM-EMV-P21 | PG21 | 13~18 | 28.3 | 8 | 27 | 30/30 | 18 |
| HSM-EMV-P29 | PG29 | 18~25 | 37 | 8 | 34.5 | 40/40 | 8 |
| HSM-EMV-P36 | PG36 | 22~32 | 47 | 9 | 40 | 50/50 | 4 |
| HSM-EMV-P42 | PG42 | 30~38 | 54 | 9 | 42 | 58/58 | 2 |
| HSM-EMV-P48 | PG48 | 37~44 | 59.3 | 10 | 42.5 | 65/65 | 2 |
Iarratas
Déan amach le cuid bheag amháin de sheath seachtrach an chábla scagtha, agus gearrtha amach an ciseal sciath, cas an seoltóir ciseal sciath agus fillte taobh amuigh den séala, ba chóir go mbeadh a fhad níos faide ná an suíomh ina saothraítear rónta. fáinne, ansin a chur isteach ar an gland cábla agus é a rothlú go docht.
Molaimid an péint a dhéantar teagmháil leis an gland cábla agus an snáithe a scríobadh chun seoltacht leictreach maith a ráthú.
