Faireog Chábla EMC (snáithe méadrach/Pg)
Faireog Chábla EMC (snáithe méadrach/Pg)
Réamhrá
Úsáidtear faireoga cábla go príomha chun na cáblaí a chlampáil, a shocrú, a chosaint ó uisce agus deannaigh. Cuirtear i bhfeidhm go forleathan iad ar réimsí cosúil le boird rialaithe, gairis, soilse, trealamh meicniúil, traein, mótair, tionscadail etc.
Is féidir linn faireoga cábla EMC a sholáthar duit déanta as práis nicilphlátáilte (Ordú Uimh.: HSM.ZX-EMV.T), cruach dhosmálta (Ordú Uimh .: HSMS.ZX-EMV.T) agus alúmanam (Ordú Uimh .: HSMAL.ZX-EMV.T).
| Ábhar: | Is é an miotail seachtrach plating nicil práis, an croí is rubar sileacain é, agus is cruach dhosmálta é an earrach |
| Raon Teochta: | Íosmhéid -50℃,Uasmhéid 150℃ |
| Céim chosanta: | Laistigh den raon clampála, is féidir leis an leibhéal cosanta IP68 a bhaint amach |
| Teastas: | CE |
Sonraíocht
(Déan teagmháil linn le do thoil le haghaidh tuilleadh eolais má tá méideanna nó snáitheanna eile uait nach bhfuil san áireamh sa liosta seo a leanas.)
| Airteagal Uimh. | Toise Cábla(mm) | Trastomhas Cábla (mm) | Fad Snáithe (mm) | Trí Teirminéal Ceangail | Trastomhas Sreang Éifeachtach Sciath (mm) | H(mm) | SW1/SW2 (mm) |
| HSM.ZX-EMV.T-M12/8(S) | M12×1.5 | 5~8 | 6 | 7 | 3.5-7 | 20 | 17/17 |
| HSM.ZX-EMV.T-M12/8-T | M12×1.5 | 4~8 | 6 | 7.5 | 4-7 | 33 | 17/17 |
| HSM.ZX-EMV.T-M16/8 | M16×1.5 | 5~8 | 6 | 7 | 3.5-7 | 23 | 17/18 |
| HSM.ZX-EMV.T-M16/9.5-T | M16×1.5 | 4~9.5 | 7 | 9.5 | 6.5~9 | 36 | 22/22 |
| HSM.ZX-EMV.T-M18/10 | M18×1.5 | 7~10 | 7 | 10.2 | 6~10 | 27 | 20/20 |
| HSM.ZX-EMV.T-M22/13 | M22×1.5 | 10~13 | 7 | 12 | 8~12 | 26.5 | 24/24 |
| HSM.ZX-EMV.T-M20/12 | M20×1.5 | 7~12 | 7 | 12 | 7.5~11 | 27 | 24/24 |
| HSM.ZX-EMV.T-M20/13 | M20×1.5 | 10~13 | 7 | 12 | 8~12 | 27 | 24/24 |
| HSM.ZX-EMV.T-M20/15-T | M20×1.5 | 12~14 | 7 | 14 | 11~14 | 35 | 24/24 |
| HSM.ZX-EMV.T-M25/16 | M25×1.5 | 11~16 | 7 | 15.5 | 8~15 | 32 | 30/30 |
| HSM.ZX-EMV.T-M25/17-T | M25×1.5 | 13~17 | 7 | 16.5 | 10.5~16 | 36.5 | 30/30 |
| HSM.ZX-EMV.T-M25/19-T | M25×1.5 | 12~19 | 7 | 18.5 | 12~18 | 39 | 32/32 |
| HSM.ZX-EMV.T-M25/22-T | M25×1.5 | 18~22 | 8 | 21 | 13.5~21 | 36 | 36/36 |
| HSM.ZX-EMV.T-M25/20-T | M25×1.5 | 16~20 | 7 | 19 | 12~19 | 34.5 | 30/30 |
| HSM.ZX-EMV.T-M27/17-T | M27×2.0 | 14~17 | 8 | 18 | 11~16 | 36.5 | 30/30 |
| HSM.ZX-EMV.T-M30/21 | M30×2.0 | 14~21 | 8 | 20.5 | 12.5~20 | 30 | 36/36 |
| HSM.ZX-EMV.T-M32/19 | M32×1.5 | 14~19 | 8 | 21 | 13.5~18 | 31 | 32/36 |
| HSM.ZX-EMV.T-M32/20-T | M32×1.5 | 16~20 | 8 | 19 | 12~19 | 33.5 | 30/36 |
| HSM.ZX-EMV.T-M32/21-T | M32×1.5 | 17~21 | 8 | 22 | 14.5~20 | 38 | 36/36 |
| HSM.ZX-EMV.T-M32/23 | M32×1.5 | 18~23 | 8 | 22 | 15.2~22 | 27.5 | 36/36 |
| HSM.ZX-EMV.T-M32/23-T | M32×1.5 | 18~23 | 8 | 22.8 | 14.8~22 | 36 | 36/36 |
| HSM.ZX-EMV.T-M32/25-T | M32×1.5 | 19~25 | 8 | 25 | 18~24 | 39 | 38/38 |
| HSM.ZX-EMV.T-M33/21 | M33×2.0 | 17~21 | 8 | 21 | 14~20 | 28.5 | 36/36 |
| HSM.ZX-EMV.T-P16/14 | PG16 | 10~14 | 7 | 13 | 8.5~12 | 27 | 24/24 |
| HSM.ZX-EMV.T-P21/19-T | PG21 | 14~19 | 7 | 18.5 | 13~18.5 | 40 | 32/32 |
| HSM.ZX-EMV.T-P21/20 | PG21 | 16~20 | 7 | 18 | 11~19 | 30 | 30/30 |
| HSM.ZX-EMV.T-P21/20-T | PG21 | 16~21 | 7 | 21 | 11.5~21 | 38 | 32/32 |
Iarratas
